perma USA - Sales & Support - FAQ

FAQ

Frequently Asked Questions

Items
Are larger units available?
Are your units Explosion Proof?
Are your units UL Approved?
Can I change the dipswitch setting on the STAR VARIO after it has been installed?
Can I lubrication more than one lube point on a single-point lubricator?
Can I move an activated perma from a bearing that is no longer being used to a bearing that is being used?
Can I remote the unit?
Can I unscrew the perma from the bearing while in operation?
Can I use a fluid grease with your oil brushes?
Can I use any oil in the Perma?
Can I use CLASSIC activating screws with a FUTURA?
Can I use the PRO outside or in wet environments?
Can the perma blow a bearing seal?
Can units be placed on existing grease lines?
Can units be refilled?
Can you adjust the discharge rate, per port, for the PRO MP-6?
Can you explain more about the chemical reaction in your chemical/gas units?
Can you program the amount of lubricant discharge rate for each port on the PRO MP-6?
Can you put oil in the PRO MP-6?
Can you use perma on Electric Motors?
Do I have to use all 6 ports on the MP6?
Do you have minimum unit order quantities?
Does perma offer electrochemical activating screws for different lubrication periods other then 1, 3, 6, or 12 months?
Does perma offer higher temperature activating screws for the CLASSIC and FUTURA?
Does the 1-month setting on the STAR VARIO push out more grease during the same timer cycles?

<< Start < Prev 1 2 3 Next > End >>

Page 1 of 3