perma PRO MP-6

The perma PRO MP-6 is available as a self-suffi cient, battery operated multi-point lubrication system. Depending on the discharge period, from 1 day to 24 months, 250 cc or 500 ccc of lubricant are dispensed from a maximum of six outlets into the lubrication points. Thanks to the maximum pressure build-up of 362 psi / 25 bar in the MP-6 distributor, the lubricant is uniformly and precisely distributed using up to 16 ft / 5 m of grease line per outlet.

  • Applications

    perma PRO MP-6 is suitable for the lubrication of roller and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems in robots. Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive.

  • Product characteristics

    Setting via push button with display and LED

    Outlet display
    LED red/green = function

    • Easy configuration of discharge period and outlets
    • Display of remaining volume and active outlets
    • Status control on display
    • Easy to set and change at any time

    MP-6 distributor with 6 outlets – Number of active outlets can be user-defined

    • Supply of 1 to 6 lubrication points with same lubricant amount
    • Precise supply of lubrication points
    • Monitoring of lubrication point status

    Pressure build-up to 362 psi / 25 bar allows remote mounting up to 16 ft / 5 m per outlet

    Additional discharge (purge)

    • Installation outside of dangerous areas or at easy-to-reach places increases workplace safety and saves time
    • Higher equipment availability, since exchange during running operation possible
    • Lubrication point can be purged to clear blockages
  • Technical Data

    • Drive
      Electromechanical
    • Power supply
      Battery operation supply 15-30 V
    • Housing
      Metal / Transparent plastic
    • Discharge period
      1 day to 24 months
    • Lubricant volume
      250 cc (8.45 oz) or 500 cc (16.90 oz)
    • Operating temperature
      -4 °F to 140 °F / -20 °C to 60 °C
    • Pressure build-up
      362 psi / 25 bar
    • Number of outlets
      1 - 6
    • Lubricants
      Grease up to NLGI 2
    • Max. tube lengths
      5.00 m
    • CE
    • UL
  • Part numbers

    The PRO MP-6 complete unit include a set of accessories to help you execute a worry-free installation. The complete units also come pre-installed, ready to setup and activate. When the LC is empty, you only need to order a PRO LC KIT and reuse your drive unit and other components.

    Please contact your perma USA representative to order a PRO complete lubrication system.

back to overview