perma FLEX is a single-point lubrication system for all types of applications and industries. Ingress protection to IP 68 level guarantees reliable lubrication in extremely dusty and moist environments. The wide operating temperature range makes it suitable for many applications indoors and outdoors. If necessary, the discharge period can be adjusted even after activation. It can be switched off during longer non-operation periods.
All-in-one system with rotary switch for discharge period setting
- Ready-to-use system / no assembly necessary
- Quick and easy activation with dial
- Discharge 1-12 months / in monthly steps = more flexibility
Reliable operation at -4 °F to 140 °F | -20 °C to 60 °C
- For use in hot and cold environments
- Year-round use for outdoor applications
Ex-proof certification, FM certification
- IP 68 protection
- Safe lubrication in dangerous and critical areas
- Reliable lubrication in moist and dusty areas
- Increased workplace safety
| Drive | Gas generating unit |
|---|---|
| Housing | Transparent plastic |
| Discharge period | 1, 2, 3, ... 12 months |
| Lubricant volume | 60 cc, 125 cc | 2.03, 4.23 oz |
| Operating temperature | -4 °F to 140 °F | -20 °C to 60 °C |
| Pressure build-up | max. 75 psi | 5 bar |
| Lubricants | Grease up to NLGI 2 | oil |
| Protection class | IP 68 |
| Max. tube lengths | 6.5 ft | 2.00 m |
| CE | ✓️ |
| Ex | ✓️️ |
| IEC Ex | ✓️ |
| FM | ✓️ |
Frequently Asked Questions About perma FLEX
Find answers to common questions about selecting, activating and using perma FLEX for automatic single-point lubrication in indoor, outdoor and demanding industrial environments.
perma FLEX is designed for automatic single-point lubrication across a wide range of industries and applications. It can be used for pumps, blowers and fans, roller and sliding bearings, open gears, spindles and chains. Its wide operating temperature range and IP68 protection make it suitable for indoor, outdoor, dusty and moist environments.
perma FLEX is an all-in-one, ready-to-use lubrication system with no assembly required. The discharge period is selected using the rotary switch on top of the lubricator, and the gas-generating drive builds the pressure needed to continuously supply the lubrication point with fresh lubricant. Explore other single-point lubrication systems for comparison.
Activation is done by turning the rotary switch to the desired discharge period. The setting can be adjusted after activation if lubrication requirements change, and perma FLEX can be switched off during longer periods when lubrication is not required.
perma FLEX is available with 60 cc and 125 cc lubricant volumes. The discharge period can be set from 1 to 12 months in monthly increments using the rotary switch.
Yes. perma FLEX is designed to operate from -4°F to 140°F (-20°C to 60°C). This range supports use in both hot and cold environments as well as year-round outdoor applications.
perma FLEX has an IP68 protection rating and carries Ex, IECEx and FM certifications. Its enclosure protection supports reliable operation in extremely dusty and moist environments, while the applicable certifications support use in approved hazardous areas.
Yes. perma FLEX supports remote mounting with a maximum tube length of 6.5 feet, or 2 meters. Line length and accessory selection should be matched to the application, lubricant and operating conditions. Review perma's installation guidance for remote-mounting preparation.
perma FLEX can dispense grease up to NLGI 2 or oil. The lubricant should be selected based on equipment manufacturer recommendations, operating conditions and the requirements of the lubrication point. Additional information is available in the perma lubricants section.
