perma STAR CONTROL

perma STAR CONTROL is machine / PLC controlled and can easily be integrated into machines with external power supply. The operating status can be transmitted to the PLC. The lubrication system offers two operating modes - TIME and IMPULSE - for more flexibility. In TIME mode, discharges are only carried out when the machine is in operation. In IMPULSE mode, the system discharges a predefined lubricant amount every time external power is applied. The desired mode can be selected via the display. perma STAR CONTROL consists of an electromechanical drive unit with LCD display and an LC unit (available in four different sizes 60 cc, 120 cc, 250 cc or 500cc). The system discharges exact amounts independent of temperature and up to 6 bar counter pressure.

  • Applications

    perma STAR CONTROL is used for single-point lubrication of roller- and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals, and chains. This lubrication system is ideal for applications that require precise lubricant metering. It is a preferred system for electric motors with very specific re-lubrication amounts. perma STAR CONTROL is protected against dust and water jets when the individual parts are assembled correctly (IP 65).

  • Product characteristics

    LCD display with push button, shows discharge settings, LC size and operating status

    Push button for setting mode, LC size, discharge amount and PIN

    • Quick and easy control of settings and remaining impulses / operating hours until LC exchange
    • More flexibility with simple programming of TIME or IMPULSE mode; settings can be changed at any time
    • PIN prevents manipulation 

    Electromechanical drive with external power supply

    All around visible LED lights (red / green), signal function and possible errors

    • Reliable, precise lubricant discharge independent of temperature and counter pressure
    • Quick function control via visual signals on the lubrication system or electronic signals on the machine's fault reporting system saves time and improves overall workflow

    Pressure build-up to 87 psi / 6 bar allows remote mounting

    Counter pressure check and manual discharge (purge function)

    • Remote installation at safe- and easy-to-access places (maximum 15 ft / 5 m) reduces workplace accidents and saves time
    • Less equipment downtime since the exchange can be carried out while the machines are running
    • Lubrication point can be purged to clear blockages

  • Technical Data

    • Drive
      Electromechanical drive using external voltage
    • Power supply
      External: 9 - 30 V DC, I (max) 0.5 A
    • Discharge period
      1, 2, 3, ..., 12 months / Impulse control
    • Lubricant volume
      60 cc (2.03 oz) or 120 cc (4.06 oz) or 250 cc (8.45 oz) or 500 cc (16.91 oz)
    • Operating temperature
      -40 °F to 140 °F / -40 °C to 60 °C
    • Pressure build-up
      87 psi / 6 bar
    • Number of outlets
      1
    • Protection class
      IP 65
    • Lubricants
      Grease up to NLGI 2 / oil
    • Max. tube lengths
      5.00 m
    • Impulse controlled
    • CE

  • Part numbers

    perma STAR CONTROL
    DescriptionPart #
    perma STAR CONTROL Drive Gen 2.0 (reusable)108985
    Cable STAR CONTROL 15 ft / 5 m108432
    Cable STAR CONTROL 30 ft / 10 m108431
    Adapter cable STAR CONTROL 30 cm angled109521
    Protection cap STAR Standard Duty (plastic)109519
    Support flange STAR Gen 2.0 1/4" NPT male x G1/4 female (brass/plastic)109419
    Support flange STAR Gen 2.0 1/8" NPT male x G1/4 female (brass/plastic)109418

 

Back to product overview