perma STAR CONTROL se usa para la lubricación de rodamientos, cojinetes, guías de deslizamiento, engranajes abiertos, cremalleras, husillos, retenes para ejes y cadenas. Gracias a la dosificación extremadamente precisa, perma STAR CONTROL es idóneo para lubricar motores eléctricos con dosis de lubricante especificada. Este sistema, con los componentes individuales unidos correctamente, está protegido contra el polvo y los chorros de agua (IP 65).
La pantalla LCD con pulsador de ajuste indica los ajustes de dosificación, el tamaño del LC y el estado de servicio
- Manejo flexible con modo TIME o IMPULSE
- Control sencillo y rápido de los ajustes
- Consulta de PIN protege contra una posible manipulación
Motor electromecánico con alimentación de tensión externa
- LED siempre visible indica el estado de servicio y las incidencias
- Lubricación fiable independiente de la temperatura ambiente y contrapresión
- Control de funcionamiento rápido por signales ópticos y por el sistema de notificación de fallos de la planta
La presión generada de 87 psi permite montaje a distancia de hasta 16 ft
- Dosificación adicional manual pulsando un botón (purga)
- Instalación fuera de áreas peligrosas aumenta la seguridad laboral
- Cambio de LC posible durante el funcionamiento
- En caso necesario, existe la posibilidad de purgar el punto de lubricación a fin de eliminar obstrucciones
| Motor | Electromecánico |
|---|---|
| Tensión de alimentación | Externa: 9 - 30 V DC, I (max) 0,5 A |
| Carcasa | Externa: 9 - 30 V DC, I (max) 0,5 A |
| Tiempo de dosificación | 1, 2, 3, ..., 12 meses | 1, 2, 3, ..., 26 semanas STAR LC 60: +15, 18, 21, 24 meses STAR LC 500: máx. 6 meses Control por impulsos |
| Volumen de lubricante | 60 cc, 120 cc, 250 cc or 500 cc | 2.03, 4.06, 8.45, 16.91 fl. oz. |
| Temperatura de servicio | -40 °F a 140 °F | -40 °C a 60 °C |
| Presión de operación | 87 psi | 6 bar |
| Clase de protección | IP 65 |
| Lubricantes | Grasas hasta NLGI 2 | aceites |
| Mangueras de distintas longitudes máx. | 16 ft / 5.00 m |
| Con control por impulsos | ✓️️ |
| CE | ✓️ |
¿Todavía tiene preguntas?
Póngase en contacto con nosotros de forma fácil por teléfono o correo electrónico para una consulta individual.
Frequently Asked Questions About perma STAR CONTROL
Find answers to common questions about powering, configuring and using perma STAR CONTROL for externally controlled automatic single-point lubrication.
perma STAR CONTROL is designed for automatic single-point lubrication of roller and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals and chains. Its precise lubricant metering also makes it well suited for electric motors that require defined lubricant quantities.
Unlike battery-powered perma STAR VARIO, perma STAR CONTROL is supplied with external power through a cable. STAR CONTROL can also transmit operating status to a PLC and offers TIME and IMPULSE operating modes for externally controlled lubrication.
In TIME mode, lubricant discharge is based on operating hours. In IMPULSE mode, the system dispenses a precisely defined lubricant quantity when voltage is supplied. The appropriate mode depends on how the equipment is controlled and how lubricant delivery should be tied to machine operation.
perma STAR CONTROL requires an external 9-30 V DC power supply with a maximum current of 0.5 A. Because the system is externally powered, the electrical connection and control arrangement should be planned as part of the installation.
Yes. The operating status of perma STAR CONTROL can be transmitted to a PLC and evaluated by the plant control system. This allows lubrication-system status to be incorporated into the facility's existing control and monitoring process.
perma STAR CONTROL is available with 60, 120, 250 and 500 cc lubricant canisters. In TIME mode, discharge settings are available in monthly and weekly intervals. The 60 cc LC includes extended monthly settings up to 24 months, while the 500 cc LC has a maximum discharge period of six months.
Yes. The system can build pressure up to 109 psi, or 7.5 bar, and supports remote mounting with a lubrication line up to 16 feet, or 5 meters. Remote mounting can place the lubricator in a safer or easier-to-access location while continuing to supply the lubrication point.
The push button on the display can be used for manual additional discharge. perma identifies this purge function as a way to supply extra lubricant and help clear blockages at the lubrication point.
perma states that the lubricant canister can be exchanged during running operation when the installation allows safe access to the lubricator. This is one reason remote mounting can improve serviceability. Always follow site safety procedures and equipment requirements.
perma STAR CONTROL can dispense grease up to NLGI 2 or oil. Lubricant selection should follow the equipment manufacturer's requirements and account for operating temperature, lubrication-point resistance and the installation
