El sistema perma CLASSIC se usa para la lubricación monopunto de rodamientos, cojinetes, guías de deslizamiento, engranajes abiertos, husillos, retenes para ejes y cadenas, etc. con temperaturas ambientales de 32 °F a 104 °F (0 a 40 °C). Sus ámbitos clásicos de aplicación son la minería, canteras, industrias del acero y automovilística y la construcción de maquinaria.
Activación sencilla mediante un tornillo de activación
- Activación única: 1, 3, 6 o 12 meses
- Lubricación permanente y económica
- Cambio rápido y sencillo sin herramientas especiales
Carcasa metálica
- Carcasa robusta para el uso en condiciones desfavorables
Autorización de protección Ex, Homologación para minería
- Lubricación segura y permanente en zonas con riesgo de explosión
- Aumento de la seguridad en el trabajo, dado que se reduce la frecuencia de acceso a áreas de peligro para fines de mantenimiento
- Posibilidad de uso subterráneo
| Motor | Reacción electroquímica |
|---|---|
| Carcasa | Metal |
| Tiempo de dosificación | 1, 3, 6, 12 meses |
| Volumen de lubricante | 120 cc | 4.06 fl. oz. |
| Temperatura de servicio | 32 °F a 104 °F | 0 a 40 °C |
| Presión de operación | Máx. 4 bares |
| Lubricantes | Grasas hasta NLGI 2 | aceites |
| Mangueras de distintas longitudes máx. | 3 ft | 1.00 m |
| CE | ✓️ |
| Ex | ✓️ |
¿Todavía tiene preguntas?
Póngase en contacto con nosotros de forma fácil por teléfono o correo electrónico para una consulta individual.
Frequently Asked Questions About perma CLASSIC
Find answers to common questions about selecting, activating and using perma CLASSIC for automatic single-point lubrication in industrial, mining and mechanical applications.
perma CLASSIC is designed for automatic single-point lubrication of roller and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals and chains. Typical applications include equipment in mining, steel, automotive and mechanical engineering environments.
perma CLASSIC uses an electrochemical gas generator. The activator screw is installed to start the system, gas pressure builds up to move the piston forward and the lubricator continuously supplies small amounts of lubricant to the lubrication point.
Both systems use an electrochemical drive, a 120 cc lubricant volume and 1, 3, 6 or 12-month activator settings. A key difference is the housing: perma CLASSIC uses a metal housing, while perma FUTURA uses transparent corrosion-resistant plastic and is positioned for hygienic or corrosion-prone environments.
perma CLASSIC has a 120 cc lubricant volume. The discharge period is selected with the activator screw and is available in 1, 3, 6 or 12-month options.
perma CLASSIC is designed for ambient temperatures from 32°F to 104°F (0°C to 40°C). The system should be used within this specified range when selecting the activator and planning the lubrication interval.
perma CLASSIC carries Ex certification and mining approval. perma identifies the system for safe and reliable lubrication in approved explosive areas and for underground use, subject to the applicable product approvals and site requirements.
Yes. perma CLASSIC supports remote mounting with a maximum tube length of 3.2 feet, or 1 meter. Remote mounting should use suitable tubes, fittings and accessories, with the line prefilled using the same lubricant as the lubrication system. See perma's installation guidance for preparation steps.
perma CLASSIC can dispense grease up to NLGI 2 or oil. Select the lubricant based on the equipment manufacturer's recommendations, the operating environment and the lubrication-point requirements. See the perma lubricants section for additional information.
