O perma STAR CONTROL é usado para lubrificar rolamentos de rolos e deslizantes, guias deslizantes, engrenagens abertas, cremalheiras, fusos, vedações de eixo e correntes. Devido à aplicação precisa do lubrificante, o perma STAR CONTROL é ideal para a lubrificação de motores elétricos com quantidades especificadas de lubrificante. O sistema é protegido contra poeira e jatos de água, sujeito à montagem correta das peças individuais (IP 65).
O visor LCD com botão de pressão mostra as configurações de aplicação, o tamanho do LC e o status operacional
- Manuseio flexível por meio do modo TIME ou IMPULSE
- Controle rápido e simples das configurações
- O PIN protege contra possíveis adulterações
Acionamento eletromecânico com fonte de alimentação externa
- O LED visível em toda a volta sinaliza o funcionamento e os erros
- Aplicação confiável de lubrificante, independentemente da temperatura e da contrapressão
- Controle rápido da função devido aos sinais e ao sistema de relatório de erros
O acúmulo de pressão de até 109 psi permite a montagem remota de até 15 pés
- Aplicação adicional manual por meio de botão no visor (purga)
- A montagem fora de áreas perigosas aumenta a segurança no local de trabalho
- O LC pode ser trocado durante a operação em andamento
- O ponto de lubrificação pode ser purgado para eliminar bloqueios
| Unidade | Acionamento eletromecânico usando tensão externa |
|---|---|
| Fonte de alimentação | Externa: 9 - 30 V CC, I (máx.) 0,5 A |
| Carcaça | Plástico transparente |
| Tempo de dispensação | 1, 2, 3, ..., 12 meses | 1, 2, 3, ..., 26 semanas STAR LC 60: + 15, 18, 21, 24 meses STAR LC 500: máx. 6 meses Controle de impulsos |
| Volume de lubrificante | 60 cc, 120 cc, 250 cc ou 500 cc | 2,03, 4,06, 8,45, 16,91 fl. oz. |
| Temperatura operacional | -40 °F a 140 °F | -40 °C a 60 °C |
| Acúmulo de pressão | Máx. 109 psi | 7,5 bar |
| Classe de proteção | IP 65 |
| Lubrificantes | Graxa até NLGI 2 | óleo |
| Comprimentos máximos dos tubos | 16 pés | 5 m |
| Impulse controlled | ✓️️ |
| CE | ✓️ |
Dúvidas?
Frequently Asked Questions About perma STAR CONTROL
Find answers to common questions about powering, configuring and using perma STAR CONTROL for externally controlled automatic single-point lubrication.
perma STAR CONTROL is designed for automatic single-point lubrication of roller and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals and chains. Its precise lubricant metering also makes it well suited for electric motors that require defined lubricant quantities.
Unlike battery-powered perma STAR VARIO, perma STAR CONTROL is supplied with external power through a cable. STAR CONTROL can also transmit operating status to a PLC and offers TIME and IMPULSE operating modes for externally controlled lubrication.
In TIME mode, lubricant discharge is based on operating hours. In IMPULSE mode, the system dispenses a precisely defined lubricant quantity when voltage is supplied. The appropriate mode depends on how the equipment is controlled and how lubricant delivery should be tied to machine operation.
perma STAR CONTROL requires an external 9-30 V DC power supply with a maximum current of 0.5 A. Because the system is externally powered, the electrical connection and control arrangement should be planned as part of the installation.
Yes. The operating status of perma STAR CONTROL can be transmitted to a PLC and evaluated by the plant control system. This allows lubrication-system status to be incorporated into the facility's existing control and monitoring process.
perma STAR CONTROL is available with 60, 120, 250 and 500 cc lubricant canisters. In TIME mode, discharge settings are available in monthly and weekly intervals. The 60 cc LC includes extended monthly settings up to 24 months, while the 500 cc LC has a maximum discharge period of six months.
Yes. The system can build pressure up to 109 psi, or 7.5 bar, and supports remote mounting with a lubrication line up to 16 feet, or 5 meters. Remote mounting can place the lubricator in a safer or easier-to-access location while continuing to supply the lubrication point.
The push button on the display can be used for manual additional discharge. perma identifies this purge function as a way to supply extra lubricant and help clear blockages at the lubrication point.
perma states that the lubricant canister can be exchanged during running operation when the installation allows safe access to the lubricator. This is one reason remote mounting can improve serviceability. Always follow site safety procedures and equipment requirements.
perma STAR CONTROL can dispense grease up to NLGI 2 or oil. Lubricant selection should follow the equipment manufacturer's requirements and account for operating temperature, lubrication-point resistance and the installation
