Preparing the lubrication point for direct mounting
1. Clean the lubrication point, remove grease fitting
2. Apply thread sealant (e.g. Loctite® 243™ / Part # 110278) to all connecting parts, screw in reducer
3. Pre-lubricate lubrication point and connecting parts, prefill grease lines if applicable (use the same lubricant as in lubrication system)
4. Remove plug and screw lubrication system into lubrication point
Activation / Installation of Lubrication System
1a. perma CLASSIC / perma FUTURA
1b. perma FLEX
1c. perma NOVA / perma STAR VARIO
2. Note activation / exchange date on label
3. Remove plug
4. Screw lubrication system into lube-point