For aggregate operations, a failed crusher motor bearing can mean more than a maintenance repair. It can interrupt production, increase replacement costs and create additional demands on maintenance teams.
At one aggregate operation, six critical crusher motor bearings operating at approximately 4,800 rpm required a more consistent approach to lubrication. Automatic lubrication was implemented to help improve lubricant delivery, reduce the risk of lubrication-related bearing failures and protect production.
A five-year ROI analysis projected $192,700 in potential savings, representing an estimated 77% reduction in modeled costs compared with the existing lubrication practice.
The Challenge
Crusher motor bearings operate in demanding conditions where dust, vibration and contamination can make consistent lubrication difficult.
For this application, recurring bearing failures presented several challenges:
- Bearing reliability: Inconsistent lubrication could contribute to premature bearing failure.
- Repair costs: Bearing failures resulted in additional repair and replacement expenses.
- Production loss: An unexpected failure could interrupt crusher operation and lead to costly downtime.
- Lubrication conditions: Critical bearings required reliable lubricant delivery despite a demanding operating environment.
The operation needed a way to provide the correct amount of lubricant consistently while reducing the maintenance demands associated with manual lubrication.
The Solution
perma STAR VARIO automatic lubricators were installed on six critical crusher motor bearings to provide controlled grease delivery at defined intervals.
The system supplied Mobil Polyrex EM grease, with the lubricators remotely mounted away from the bearing locations. This allowed the lubrication points to receive consistent lubricant delivery while keeping the lubricators accessible.
The lubrication setup was configured around the specific motor bearing requirements, operating conditions and appropriate lubricant delivery.
“Consistent lubrication helps protect more than the bearing. It helps protect production.”
Application Engineer, perma USA
The Results
The five-year ROI analysis demonstrated the potential financial impact of moving to automatic lubrication.
$192,700 potential five-year savings
Modeled five-year costs were projected to decrease from approximately $251,000 to $58,000, representing an estimated 77% cost reduction.
The original ROI analysis also estimated a 33% reduction in work-safety risk exposure associated with the lubrication practice.
Operational Impact
Beyond the projected financial savings, automatic lubrication supports a more consistent approach to maintaining critical crusher motor bearings.
The application provides the potential for:
- More consistent lubricant delivery
- Fewer lubrication-related bearing failures
- Lower repair and replacement costs
- Less production loss associated with unexpected bearing failures
- Reduced maintenance demands around critical lubrication points
Could Automatic Lubrication Reduce Cost at Your Operation?
The potential impact of automatic lubrication depends on the equipment, operating conditions, maintenance practices and cost of downtime at each facility.
A personalized ROI assessment can help identify where lubrication-related failures are creating costs and estimate the potential savings from moving to automatic lubrication.